IMAPS Home     
 
 
 
Final Conference Schedule Open print version   

Download the EDS 2008 Final Schedule in pdf

WEDNESDAY 10th September 2008
   
8:00 - 12:30 REGISTRATION
9:00 - 10:30 SYMPOSIUM OPENING
Prof. Vladislav Musil, Prof. Josef Šikula
   Invited papers
   
  Evaluation of AlGaN/GaN and AlGaAs/GaAs Heterostructure Deep Levels by Low Frequency Noise Measurements
Prof. Munecazu Tacano
Meisei University, Japan
 
Trends in Passive Components
Tomáš Zedníček
AVX Czech Republic
   
10:30 – 11:30  COFFE BREAK - POSTERS SESSION No. 1
   
11:30 - 12:50  Invited papers
   
Fabrication of (CdZn)Te Substrates by Chemical Polishing
Pavel Moravec, Pavel Höschl, Eduard Belas, Roman Fesh, Jan Franc, Pavel Hlídek
Charles University in Prague, Czech Republic
Scintillation Breakdowns in Chip Tantalum Capacitors
Alexander Teverovsky
PSGS/Goddard operations, NASA, USA
   
12:50 - 14:00  LUNCH
   
14:00 - 15:20  Plenary session I. Semiconductors and Integrated circuits
 Chairman: Michael Brutscheck
   
  Investigation and Implementation of Test Vectors for Efficient IC Analysis
Michael Brutscheck, Marco Franke, Andreas Thomas Schwarzbacher, Steffen Becker
Dublin Institute of Technology, Ireland
  Characterization of thin layers of CdTe by photoluminescence
Jan Franc, Nikolai Sochinskii, J Rodríguez-Fernández, M Abellan, Volodymyr Babentsov, Pavel Hlídek, Gabriel Korocsmaros
MFF UK, Czech Republic
  SiC Schottky diodes with noble metals
Petr Macháč, Bohumil Barda
Institute of Chemical Technology, Czech Republic
  Structure of Ti-based contacts on n-type 6H-SiC
Bohumil Barda, Petr Macháč, Stanislav Cichoň
Institute of Chemical Technology, Czech Republic
   
15:20 - 16:20  COFFE BREAK - POSTERS SESSION No.2
   
16:20 - 17:40  Plenary session II. Passive components
 Chairman: Tomáš Zedníček
  Leakage Current Noise and Reliability of NbO and Ta Capacitors
Josef Šikula, V. Sedlakova, H. Navarova, J. Hlavka, M. Tacano, Z. Sita
Brno University of Technology, Czech Republic
  Diagnostics of high-voltage varistor quality using resonant ultrasound spectroscopy
Lech Hasse, Janusz Smulko
Gdansk University of Technology, Poland
  Influence of structure of joint soldered with lead-free solders on its outer appearance
Jiri Podzemsky, Jan Urbánek
Czech Technical University, Czech Republic
  Field Crystallization in Tantalum Capacitors, DCL and Reliability
Tomáš Zedníček
AVX Czech Republic
   
17:45 - 18:30  IMAPS CZ&SK meeting
   
18:30  Departure to Social Evening by bus (vine cave Hustopeče)
 
THURSDAY 11th September 2008
   
9:30 - 10:50 COFFE and STUDENT POSTERS SESSION No.3
   
10:50 - 11:00 AWARDS for THE BEST STUDENT POSTERS
   
11:00 - 12:40  Plenary session III.
 Chairman: Jiří Jakovenko
   
  Model of Matrix Converter-Fed Asynchronous Motor Drive Controlled by Takahashi Direct Torque Control
Dragan Kuzmanovic, Jiří Lettl, Stanislav Flígl
Czech Technical University, Czech Republic
  Optimal Modal Control of Dual-Mass Electromechanical Systems
Mikho Mikhov, Tsolo Georgiev
Technical University of Sofia, Bulgaria
Using AVISPA in the Education of Network Security
Pavel Ocenasek, Roman Trchalík
Brno University of Technology, Czech Republic
Suspended Island MEMS Structure for High Temperature Gas Sensors
Jiri Jakovenko, Miroslav Husak, Tibor Lalinsky, Milan Drzik
Czech Technical University, Czech Republic
   
12:40 - 12:50  CLOSING CEREMONY
   
13:00 - 14:00   LUNCH
   
 14:00 - 17:00 Guided tour in Brno Center – for participants and accompanying persons
 
Note: Oral Presentation of every participant's should take 20 min
 
POSTERS SESSIONS
 
The poster hall will be opened for setting Posters session No.1 on Wednesday, 10 th September, 2008.
The posters should be available for visitors from 9:00 to 13:00.
Posters for The Posters session No.2 should be available for visitors from 14:00 to 17:40.
Posters for The Posters session No.3 should be hung on Wednesday from 17:40 for Thursday session.

Authors are expected to be next to her/his poster on
Wednesday, 10th September, 2008, from 10:30 to 11:30
Wednesday, 10th September, 2008, from 15:20 to 16:20
Thursday, 11th September, 2008, from 9:30 to 10:50

The poster board sizes are 90 x 135 cm (width x high)
 
POSTERS SESSION No.1
 
Floating GIC and its implementation,
Mahmoud Shaktour, Dalibor Biolek, Brno University of Technology
Grounded impedance current sensing
Jiří Vávra, Dalibor Biolek, Brno University of Technology
Interactive analysis of switched dc-dc converters in micro-cap
Viera Biolková, Dalibor Biolek, Brno University of Technology
Wireless Communication Platform IQRF – Case Study,
Radek Kuchta, Radimir Vrba, Vladimir Sulc, Brno University of Technology
Direct Accessing the Peripherals of Communication Devices Connected in Wireless Networks
Vladimir Sulc, MICRORISC s.r.o.
Demonstration of Two Embedded Wireless Applications Utilizing IEEE 802.15.4 Radio Chip
Ondřej Sajdl, Radimír Vrba, Brno University of Technology
Fabrication of Devices and Sensors based on Silicon-on-Insulator Technology,
Pavel Kulha, Miroslav Husak, Petr Mikulik, Milan Kucera, Czech Technical University in Prague
Analysis of Capacitive Coupling in CMOS Integrated Circuits,
Jan Novák, Julius Foit, Vladimir Janicek, Brno University of Technology
Thermodynamic Aspects of the Nanometre Scale Chip Design
Vladimír Áč, Miroslav Sumega, Alexander Dubcek University of Trencin
Digital Phase-Locked Loop For Data Clock Recovery System
Pavel Steffan, Dušan Zošiak, Brno University of Technology
The Lead Detection in Solders
Pavel Steffan, Ladislav Macháň, Brno University of Technology
Scaling of RTS noise in MOSFETs
Jan Pavelka, Josef Sikula, Munecazu Tacano, Brno University of Technology
Noise Spectroscopy of Traps In MOSFETS
Jan Pavelka, Josef Sikula, Munecazu Tacano, Masato Toita, Brno University of Technology
A New Model of Charge Transport in Very Thin Mis Structures by Indirect Tunnelling Via Insulator-To-Semiconductor Interface Traps
Juraj Racko, P. Benko, D. Donoval, L. Harmatha, Slovak University of Technology, Bratislava
Using Spreading Resistance Profiling and Simulations for Monitoring of Phosphorus Contamination in Ion Implantation of Arsenic
Marián Kuruc, Ladislav Hulényi, Rudolf Kinder, Slovak University of Technology, Bratislava
The Influence of Technological Process on Properties of Thin Film Capacitors
Ivana Beshajová Pelikánová, Czech Technical University in Prague
Factors Influencing the Electrical Properties of Organic Thin Film Transistors
Rudolf Kinder, Jaroslav Kováč, Ján Jakabovič, Ladislav Harmatha, Ladislav Hulényi, Slovak University of Technology, Bratislava
Synthesis of Carbon Nanotubes on Natural Aluminosilicates
Magdaléna Kadlečíková, Juraj Breza, Katarína Pastorková, Karol Jesenák, Michal Kolmačka, Miroslav Michalka, Slovak University of Technology, Bratislava
Autonomous Polymer Pressure Sensor
Vladimír Janíček, Miroslav Husak, Czech Technical University in Prague
Organic sensors for vapours detection
Jan Řeboun, Tomáš Blecha, Aleš Hamáček, University of West Bohemia, Pilsen
Optimizing Geometrics Proportions of Nanostructures by Genetics Algorithm,
Martin Magát, Radimír Vrba, Michal Pavlík, Brno University of Technology
Thick Film Sensor on Principle of Balanced Process Monitoring
Zdeněk Řezníček, Ivan Szendiuch, Michal Řezníček, Brno University of Technology
Some remarks to the Education in  Microelectronics Technology
Ivan Szendiuch, Brno University of Technology
Electropolymerization on interdigital structures for vapours sensors
Tomáš Blecha, Aleš Hamáček, Jan Řeboun, University of West Bohemia, Pilsen
 
POSTERS SESSION No.2
 
Sintering low temperature co-fired ceramics
Petr Kosina, Edita Hejátková, Josef Šandera, Brno University of Technology
Methodology of the lead and lead free solders surface tension measurement
Karel Dušek, Jan Urbánek, Czech Technical University in Prague
The Novel Digital Design of a Cell for Cellular Neural Network
Daniela Ďuračková, Emil Raschman, Slovak University of Technology, Bratislava
Multiplying Digital-To-Analog Converter With 1,5 and 2,5 Bit Resolution – Case Study
Jiří Háze, Vilem Kledrowetz, Brno University of Technology
Analogue Automated Multi- Criterion Design in Comparison to Numerical Optimization Professional Tool
Jiří Maršík, Pravoslav Martinek, ASICentrum, Prague
Investigation of an Electrical Machine in Multidomain Environments
Marco Franke, V.Rusin, M. Brutscheck, R. Kasper, H. Mrech, U. Schmucker, University of Applied Sciences, Merseburg, Germany
Theory for Prediction of Electrical Contact Resistance of ACAs Considering Electron Tunneling
Aleš Duraj, Pavel Mach, Karel Dušek, Czech Technical University in Prague
Third harmonic index as a diagnostic tool of high-voltage varistors
Lech Hasse, Janusz Smulko, Ludwik Spiralski, Gdansk University of Technology
Transient Phenomena on Multiconductor Transmission Lines Modeled by Lumped-Parameter Networks
Lubomír Brančík, Brno University of Technology
A Low Power Dissipation Technique for CCII
Fabian Khateb, Dalibor Biolek, Vladislav Musil, Brno University of Technology
Testability Enhancement of Multilevel Designs Guided by Testability Analysis Method
Josef Strnadel, Brno University of Technology
Numerical Modeling of a Tornado Electromagnetic Field
Pavel Fiala, Tomáš Jirků,Tomáš Kříž, Brno University of Technology
The Temperature Internal Measurement of Cu Bulk Resistivity
Karel Bartůšek, Tomáš Jirků,Pavel Fiala, Brno University of Technology
Analysis, Design and Optimization of Vibration Minigenerator
Pavel Fiala, Tomáš Jirků, Brno University of Technology
Numerical Modeling of Nontrivial Reflecting Parts Lights Systems
Pavel Fiala, Eva Kroutilova, Tomas Kriz, Radim Kadlec,Brno University of Technology
Analysis of Switched Circuits Using HSpice RF
Zdenek Kolka, Jan Kovář, Brno University of Technology
The power and noise characteristics of the radiation of the He-Ne laser with the transverse microwave discharge in a magnetic field
Turgunali Akhmadjanov,Misodik Mirinoyatov, Dildora Mirinoyatova, National University of Uzbekistan, Tashkent
Influence of Inhomogenities in Dielectric Sample at Microwave Signal
Dagmar Faktorová, University of Žilina, Slovak Republic
FDTD Analysis of a Linear Transmission Line with the Nonlinear Load
Jarmila Dědková, Miloslav Steinbauer, Radim Kadlec, Brno University of Technology
Segmentation of retinal layer structures on optical coherence tomography images,
Jan Mikulka, Brno University of Technology
Investigation of band gap of Dy doped GaN layers using the transmittance measurement
Václav Prajzler, Ivan Hüttel, Jarmila Špirková, Zdeněk Burian, Vítězslav Jeřábek, Czech Technical University in Prague
Design and Construction of a VHGT-Attached WDM -Type Triplex Transceiver Module Using Polymer PLC Hybrid Integration Technology
Vítězslav Jeřábek, Ivan Hüttel, Václav Prajzler,Karel Bušek, Petr Seliger, Czech Technical University in Prague
Inductance Powering for Electronic Systems
Adam Bouřa,Miroslav Husák, Czech Technical University in Prague
Internet Graphical Simulation Tool for Computer Analysis of Electrical Circuits
Jaroslav Kadlec, Lukáš Popelka, Brno University of Technology
Solder Joint Failure Identification
Josef Šandera, Brno University of Technology
Cracks in Soldered Joints Subjected To Mechanical Stress
Marek Tučan, Karel Dušek, Jan Urbánek, Czech Technical University in Prague
The Reliability of Solder Joint and Factors which Influence It
Olga Russkikh, Josef Šandera, Fabian Khateb, Brno University of Technology
 
STUDENT POSTERS SESSION No.3
 
PD measurements with microsensors
Tomáš Havlíček, Michal Pavlík, Jaroslav Boušek, Brno University of Technology
Onboard Computer for Status and Functional Parameters Evaluation of Internal-Combustion Engines
David Jaroš, Radek Kuchta, Brno University of Technology
Implementations of Artificial Neural Networks in Fpga Chips
Marek Bohrn, Brno University of Technology
Numerical Modeling of Lighting Systems
Radim Kadlec, Eva Kroutilová, Pavel Fiala, Brno University of Technology
Electric field measurement using MRI
Jan Mikulka, Pavel Fiala, Karel Bartušek, Brno University of Technology
Current Conveyor CCII For High-Accuracy Gm-Stage In Sensor Current Measurement System
Roman Prokop, Vladislav Musil, Brno University of Technology
Realization of the Private Branch Exchange Based on the Asterisk Project
Assaid Othman Sharoun, Brno University of Technology
Microconductometer system based on bipolar pulse method
Jiří Stehlík, Radek Kuchta, Brno University of Technology
Current Mode Operational Amplifier
Milan Valenta, Pravoslav Martinek, Czech Technical University in Prague
Microplasma noise sources and noise spectroscopy analyzing
Jan Dolenský, Jiri Vanek, Kristyna Jandova, Zdenek Chobola, Brno University of Technology
Dynamic Light Beam Induced Voltage testing method of solar cell
Jan Dolenský, Jiri Vanek, Kristyna Jandova, Brno University of Technology
Tutorial of the Design of the State Machine for Analogue Integrated Circuits
Miloslav Kubař, Jiří Jakovenko, Czech Technical University in Prague
Thermostated Chamber Conrolled by Peltier’s Cooler for Electronics Testing
Jiří Sedláček, Radek Kuchta, Jaromír Hubálek, Brno University of Technology
Current-Triggered Bipolar ESD Power Clamp
Petr Běťák, Brno University of Technology
PWM Rectifier Realization
Jan Bauer, Jiri Lettl, Czech Technical University in Prague
Matching in Miller OTA: Case Study
Martin Laža,Marek Bohrn, Brno University of Technology
Model design of the switched current first generation memory cell
Michal Pavlík, Radimír Vrba, Brno University of Technology
Properties of Laser Machined and Metallized of Laser Drilled Via Interconnections in LTCC Substrates
Jan Vaněk, Ivan Szendiuch, Brno University of Technology
Interconnection in 3D structure
Petr Kosina, Edita Hejátková, Josef Šandera, Brno University of Technology
Impedance Spectroskopy of Electrochemical Microsensors
Václav Feber, Jaromír Hubálek, Brno University of Technology
Sensoric System for Automated Monitoring Environment During Plant Growing
Jaromír Žák, Jaromír Hubálek, Brno University of Technology
Study of solar cells I-V characteristics behavior in wide range of temperature
Robert Macku, Pavel Škarvada, Pavel Koktavý, Brno University of Technology
Experiments and numerical modeling of non-homogenous parts in materials
Jan Mikulka, Pavel Fiala, Eva Kroutilová, Miloslav Steinbauer, Přemysl Dohnal, Karel Bartušek, Brno University of Technology
Using MSC and SDL Languages for Description of Network Communication,
Roman Trchalík, Pavel Ocenasek, Miroslav Sveda, Brno University of Technology
OTA-based current differencing unit
Jiří Vávra, Dalibor Biolek, Brno University of Technology
Optimization of ladder filters with GmC simulation of floating inductors
Mahmoud Shaktour, Josef Bajer, Dalibor Biolek, Brno University of Technology
Improvement of Sensing Properties of the Thick-Film Sensor Using the Rotating Vessel Cell
Zdenek Pytlicek, Jan Prasek, Martin Adamek, Brno University of Technology
MEMS Sensor Based on Nanotechnology
Richard Ficek, Radimír Vrba, Ondřej Jašek, Marek Eliáš, Lenka Zajíčková, Brno University of Technology